| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-15
b.
Check all parts for free fluid passage in all parts, openings, and orifices. Clean with solvent as required.
c.
Check all parts for nicks, dents, cracks, scoring, and other physical defects. Replace as required.
d.
Replace all preformed packings.
ASSEMBLY
a.
Replace roll pin (21).
b.
Replace plain encased seal (15) over roll pins (21).
c.
Replace spool (7).
d.
Replace check valve (19).
e.
Replace orifice plug (4).
f.
Install preformed packings (5, 10, 11, 12, 20).
g.
Replace linear actuating piston (9).
h.
Replace springs (18).
i.
Replace spring tension washers (8).
j.
Replace end caps (17).
k.
Replace socket head capscrews (16).
1.
Install preformed packings (22, 23, 24) on body and subplate.
m.
Replace body (18) to subplate (13) and secure with screws (14).
n.
Replace solenoid (3) and secure with screws (25).
o.
Connect electrical leads, using the tags as a guide.
p.
Replace solenoid cover plate (1) and secure with the screws (2).
q.
Restore electrical power to the hydraulic power pack and remove "Out of Service" tag.
r.
Verify operation of the solenoid assembly by operating the windlass in both directions.
4-49
|
||
|
||
