Replace/Repair Hydraulic Valve.

Custom Search

Operate and Test

TM-55-1905-223-24-16 Stern Anchor Winch for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

FIGURE 2-5. Hydraulic Valve

TM 55-1905-223-24-16

2-14. Replace/Repair Hydraulic Valve. (FIGURE 2-5)

This task covers: a. Removal, b. Repair, c. Replacement.

INITIAL SETUP

Tools

Equipment Condition

Tool kit, general mechanic's,

TM 55-1905-223-10: System shut down,

tagged "Out of Service - Do Not

Operate."

Materials/Parts

General Safety Instructions

Hydraulic valve

P/N CBGH-LJN-YKM

Do not work on pressurized system.

Cartridge P/N CBGH-LJN (qty 2)

Electrical tags, Item 16, Appendix C

WARNING

Do not attempt the following procedure on a pressurized system. Escaping pressurized air and/or liquids

can cause serious injury.

Ensure system has been shut down IAW para. 2-13 and system pressure gauge reads zero.

REMOVAL

a. Disconnect Hydraulic Line/Hose Connectors.

CAUTION

During replace/repair of hydraulic systems, all openings should be capped/plugged to prevent foreign

matter or contamination from entering system.

NOTE

When removing lines/connectors, use suitable container to catch escaping fluid.

(1) Disconnect hydraulic line connectors (1) and (2).

(2) Disconnect hydraulic hose connector (3) and (8).

2-26