| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
(2)
Drive tapered forelock pin (19) out of detachable chain link body with a punch.
(3)
Detach lugs (18) from detachable chain link body (17).
(4)
Separate anchor (10) and swivel and link assembly (13) from detachable link body (17).
(5)
Remove detachable chain link body and attaching assembly.
b. Swivel and Link Assembly, Shackle. (FIGURE 4-1)
(1)
Remove shackle pin (15) from shackle (14).
(2)
Separate swivel and link assembly (13) and single leg wire rope assembly (16) from shackle (14).
(3)
Remove shackle (14), pin (15) and swivel and link assembly (13).
c. Fluked Marine Anchor. (FIGURE 4-1)
(1)
Insert sling through mounting eye on anchor (10) and attach to lifting device.
(2)
Lift anchor to release tension on turnbuckle (7).
(3)
Remove shackle pin (5) from shackle (6).
(4)
Separate anchor (10) from turnbuckle (7).
(5)
Remove shackle (6).
(6)
Lower anchor until fluked end of anchor clears storage position.
(7)
Lift anchor clear of stern and secure on dock or deck.
d.Turnbuckle. (FIGURE 4-1)
(1)
Remove shackle pin (8) from s hackle (9).
(2)
Separate eye of turnbuckle (7) from pad eye (11).
(3)
Remove shackle (9), and turnbuckle (7).
e. Single Leg Wire Rope Assembly. (FIGURE 4-2)
(1)
Use lifting sling to position empty reel on a stand at dockside.
(2)
Remove lifting sling.
(3)
On bulkhead directly behind winch assembly, push START button on stern control box.
4-6
|
||
|
||
