| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
f.
Bearings. (FIGURE 4-7)
(1)
Remove four hexagon head capscrews (7) securing bearing caps (8) to levelwind side frame (1).
(2)
Remove bearing caps (8) and shaft (3).
(3)
For disassembly refer to DISASSEMBLY procedures, step a.
g. Shaft Guide. (FIGURE 4-8)
(1)
Slide lifting sling (1) under the top section of the levelwind carriage (2) as shown in FIGURE 4-8 with tension
taken off shaft guide (3).
(2)
Remove eight hexagon head capscrews (4), hexagon plain nuts (6) and lockwashers (5) securing access
covers (7) to top of levelwind side frames (8).
(3)
Remove access covers (7).
NOTE
Four soldiers are required for shaft guide removal procedure.
Shaft guide can be removed from either end of levelwind carriage.
(4)
Slide shaft guide (3) across top of levelwind side frames (8) and through top section of levelwind guide (9).
(5)
Remove shaft guide to a secure area.
(6)
Lifting device and sling is temporarily left in place to support levelwind carriage during removal procedures.
h. Diamond Shaft Pawl. (FIGURE 4-8)
(1)
Remove four hexagon head capscrews (10) and lockwashers (11) securing pawl cap (12) to pawl cap flange
(14) which is welded to the lower section of levelwind guide (15).
(2)
Separate and remove pawl cap (12) from pawl cap flange (14).
(3)
Remove diamond shaft pawl (13) from interior of pawl cap flange (14).
4-21
|
||
|
||
