| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
i.
Levelwind Side Frames. (FIGURE 4-9)
NOTE
Four soldiers are required for removal procedure.
(1)
Make sure that lifting device and sling (1) support weight of levelwind carriage (2).
(2)
Remove four recessed hexagon head capscrews (7), hexagon plain nuts (9), and lockwashers (8) securing
levelwind side frame (10) to base of winch platform.
(3)
Disengage levelwind side frame (10) from diamond shaft (11) as levelwind side frame is separated from
base of winch platform.
(4)
Remove levelwind side frame (3) to a secure area.
(5)
Disengage diamond shaft (11) from levelwind side frame (3) as diamond shaft is pulled through lower section
of levelwind guide (12).
(6)
Remove diamond shaft to a secure area.
(7)
Remove four recessed hexagon head capscrews (4), hexagon plain nuts (6), and lockwashers (5) securing
levelwind side frame (3) to base of winch platform.
(8)
Position levelwind carriage (2) on a clean flat surface for disassembly.
(9)
Remove lifting device and sling.
j.
Levelwind Horizontal Rollers. (FIGURE 4-10)
(1)
Position levelwind carriage (1) with levelwind horizontal rollers (4, 14) exposed for disassembly.
(2)
Remove two hexagon head machine bolts (7) and lockwashers (6) securing keeper (5) on end of the upper
roller shaft (2).
(3)
Remove keeper (5).
(4)
Support weight of roller (4) as shaft (2) is withdrawn from roller (4) and out of shaft support brackets (8). Be
sure to catch washers (3) when withdrawing the shaft.
4-23
|
||
|
||
