| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
(5)
Remove shaft (2) and roller (4).
(6)
Remove two hexagon head machine bolts (9) and lockwashers (10) securing keepers (11) on end of the
lower roller shaft (14).
(7)
Remove keeper (11).
(8)
Support weight of roller (14) as shaft is withdrawn from roller (14) and out of shaft support brackets (8). Be
sure to catch washers (12) when withdrawing the shaft.
(9)
Position levelwind horizontal rollers (4, 14) on a clean flat surface for disassembly.
k.
Horizontal Roller Bushings.
For disassembly, refer to DISASSEMBLY procedures, step c.
l.
Levelwind Vertical Rollers. (FIGURE 4-11)
(1)
Position levelwind carriage (1) with levelwind vertical roller (7) exposed for disassembly.
(2)
Remove two hexagon head machine bolts (2) and lockwashers (3) securing keeper (4) on both ends of shaft
(5).
(3)
Remove keeper (4).
(4)
Support roller (7) as shaft (5) is withdrawn from roller (7) and out of shaft support brackets (6).
(5)
Remove shaft (5) and roller (7). Be sure to catch washers (8) when withdrawing shaft (5).
(6)
Reposition levelwind carriage (1) with levelwind vertical roller on opposite side exposed for disassembly
(7)
Remove two hexagon head machine bolts (2) and lockwashers (3) securing keeper (4) on both ends of shaft
(5).
(8)
Remove keeper (4).
(9)
Support roller (7) as shaft (5) is withdrawn from roller (7) and out of shaft support brackets (6).
(10) Remove shaft (5) and roller (7). Be sure to catch washers (8) when withdrawing shaft (5).
(11) Position levelwind vertical rollers (7) on a clean flat surface for disassembly.
4-26
|
||
|
||
