| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
m. Vertical Roller Bushings.
For disassembly, refer to DISASSEMBLY procedures, step d.
n. Levelwind Bushings.
For disassembly, refer to DISASSEMBLY procedures, step e.
o. Gypsy Cathead Winch. (FIGURE 4-13)
NOTE
Two soldiers are required for removal procedures.
(1)
Remove two hexagon head capscrews (1) and lockwashers (2) securing cathead retaining plate (3) and
gypsy cathead (4) to spool shaft (5).
(2)
Remove gypsy cathead and cathead retaining plate to a clear area.
(3)
Remove two hexagon head capscrews (9) and lockwashers (8) securing cathead retaining plate (7) and
gypsy cathead (6) to spool shaft (5).
(4)
Remove gypsy cathead and cathead retaining plate to a clear area.
(5)
Retain machine keys (10).
p. Springs. (FIGURE 4-14)
(1) Maintain an upward pressure on spring support bracket (14) as hexagon head machine bolts (15) and
lockwashers (16) are removed.
(2)
Lower spring support bracket (14) to release springs (9) from spring eyelets (8) and remove as an assembly
to a secure area.
q. Split Brake Band Pin. (FIGURE 4-14)
(1)
Turn mechanical brake handwheel (1) counterclockwise to release braking tension.
(2)
Remove cotter pin (5)from rear brake pin (6).
(3)
Support weight of bottom brake band (3) as brake pin (6) is withdrawn from brake band bracket (7). Lower
bottom brake band to base of winch platform.
(4)
Remove thread end rod (2) by turning brake handwheel (1) counterclockwise until rod disengages from
headless straight pin (18).
(5)
Remove two cotter pins (22) from brake pin (21).
(6)
Withdraw brake pin (21) from anchor brake arm (20) and brake band bracket (23).
4-29
|
||
|
||
