| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
h. Observe identifying marks or features on pump housing for alignment during assembly. Stamp housing with
alignment marks.
i.
Remove retaining bolts (10).
j.
Separate front internal housing (11) from stator assembly (18).
k.
Remove dowel pins (12), ball bearings (13), and preformed packing (14). Note location of dowel pins and
checkballs to be used during assembly.
l.
Remove machine screws (15) securing plate (16) to stator (18).
m. Remove plate (16) and preformed packing (17).
n. Separate stator (18) from stacked stator (29).
o. Remove dowel pins (25), plate (27), and preformed packing (26). Note location of dowel pins to be used during
assembly.
p. Slide rotor (21) out of stator (18).
q. Separate rotor vanes (22), outer springs (23), and inner springs (24) from rotor (21).
r.
Remove stator vanes (19) and springs (20) from stator (18).
s.
Separate stacked stator (29) from rear housing (43).
t.
Remove dowel pins (38), ball bearings (41), preformed packing (40) and roller bearing (42). Note location of
dowel pins and ball bearings to be used during assembly.
u. Remove machine screws (37) securing plate (39) and preformed packing (36) to stacked stator assembly (29).
v.
Remove plate (39) and preformed packing (36).
w. Repeat procedures in steps (p), (q) and (r) for disassembly of stacked stator (29).
x.
Remove machine bolts (47) securing rear housing manifold (48) to rear housing (43).
y.
Separate rear housing manifold from rear housing.
z.
Remove preformed packing (49, 50, 51 and 52). Note location of preformed packing to be used during assembly.
aa. Remove machine bolts (46) securing access cover (45) to rear housing (43).
ab. Separate access cover from rear housing. Remove preformed packing (44).
4-58
|
||
|
||
