Intermediate Speed Pinion

Custom Search

FIGURE 4-33. Low Speed Gear Assembly.

TM-55-1905-223-24-16 Stern Anchor Winch for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

FIGURE 4-35. Intermediate Speed Pinion.

TM 55-1905-223-24-16

NOTE

Use a puller or press of proper size to remove bearings and gears from shaft assembly.

(1)

Remove intermediate speed (I.S.) bearing (1) and I.S. gear (2) from L.S. pinion shaft (3).

(2)

Remove I.S. bearing (5) and L.S. pinion (4) from shaft.

(3)

Retain machine keys (6,7).

Intermediate Speed Pinion. (FIGURE 4-35)

CAUTION

Make sure you restrict movement of intermediate speed pinion during removal procedure.

NOTE

Use a puller or press of proper size to remove bearings and gears from shaft assembly.

(1)

Remove I.S. bearing (1) from shaft (4).

(2)

Remove spacer (2) from shaft (4).

(3)

Separate I.S. pinion (3) from high speed bevel gear (5) and remove from shaft (4).

(4)

Separate I.S. bearing cartridge (8) from I.S. bearing assembly (7) and remove from shaft.

(5)

Remove I.S. bearing assembly (7).

(6)

Remove spacer (6) and high speed bevel gear (5) from shaft.

(7)

Retain machine keys (9,10).

d. High Speed Shaft Assembly. (FIGURE 4-36)

NOTE

Use a puller or press of proper size to remove bearings and gear from shaft assembly.

4-72