ASSEMBLY - TM-55-1905-223-24-160142

Custom Search

INSPECTION

TM-55-1905-223-24-16 Stern Anchor Winch for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

ADJUSTMENT

TM 55-1905-223-24-16

(1)

Install oil slinger (4) and snap ring (5) on shaft (3) from bolt end of shaft.

(2)

Install machine key (10).

(3)

Install bearing (6) and high speed bevel gear (7).

(4)

Install flat washer (8) and machine bolt (9), and secure bearing and gear assembly to shaft (3).

(5)

Install bearing assembly (2) and high speed bearing cartridge (1) on shaft (3).

b. Intermediate Speed Pinion. (FIGURE 4-35)

NOTE

Use a press of proper size to replace bearings and gears on shaft assembly.

CAUTION

Make sure you restrict movement of intermediate speed pinion.

(1)

Install machine keys (9, 10).

(2)

Install high speed bevel gear (5) and spacer (6) on shaft (4).

(3)

Install I.S. bearing assembly (7) and I.S. bearing cartridge (8) on shaft.

(4)

Install I.S. pinion (3) on shaft.

(5)

Install spacer (2) and I.S. bearing (1) on shaft.

Intermediate Speed Gear Assembly. (FIGURE 4-34)

NOTE

Use a press of proper size to replace bearings and gears on shaft assembly.

CAUTION

Make sure you restrict movement of I.S. gear assembly.

4-75