BATTERY CHARGER - TM-55-1905-223-24-18-10241

Custom Search

BRAKE PANEL ASSEMBLY

TM-55-1905-223-24-18-1 Landing Craft Utility (LCU) NSN 1905-01-154-1191 Basic Craft Part 1 Manual

MOTOR CONTROLLERS

TM 55-1905-223-24-18-1

Troubleshooting - CONT

Table 2-2.

Malfunction

Test or Inspection

Corrective Action

BRAKE PANEL ASSEMBLY - CONT

196. No air pressure at port #2 of brake panel.

STEP 1. Check for defective shuttle valve.

Replace shuttle valve, para. 2-119.

Refer to Gear Mate Control System Troubleshooting procedures.

STEP 2.

197. No (OUT) air pressure at port #3 of break panel.

STEP 1. Check for defective brake panel assembly.

Repair/Replace brake panel assembly, para. 2-122.

BATTERY CHARGER

198. No output.

STEP 1. Check fuse.

Replace fuse, para. 2-195.

STEP 2. Check electrical cables.

Tighten or repair/replace.

STEP 3. Check for defective battery charger.

Replace battery charger, para. 2-195.

BATTERY

199. Battery will not charge.

STEP 1. Check terminals.

Clean terminals.

STEP 2. Check electrolyte.

Add electrolyte as required.

STEP 3. Check for defective cells.

Use a multimeter and check cell voltage.

200. Battery will not hold charge.

STEP 1. Check electrolyte.

Use a hydrometer, to check specific gravity of electrolyte.

2-155