| Tweet |
Custom Search
|
|
|
|||||
|
|||||
 TM 55-1905-223-24-18-1
d.
Install piston (10), wearing ring (11), and preformed packing (12, 13) in
tube cylinder (9).
I n s t a l l piston rod (2).
e.
I n s t a l l rod clevis (17).
f.
Line up tie rods (19) with holes in eye bracket (20) and cap (14).
g.
Secure eye bracket with tie rod nuts (18).
h.
i.
Install cap (14) and secure with socket head screws (15).
REPLACEMENT (FIGURE 2-112)
a. Replace Cylinder Assembly (Bowthruster),
CAUTION
Make sure all air lines in the system are
blown free of any foreign material before
replacement.
(1) Position cylinder assembly (26) on mounting bracket and secure with
mounting hardware (23, 25).
(2) Remove caps or plugs from tubing.
(3) Connect tubing at (22, 24).
Replace Cylinder Assembly (Fire PUmp).
b.
(1) Position cylinder assembly (21) on mounting bracket and secure with
mounting hardware (18, 20).
(2) Remove caps or plugs from tubing.
(3) Connect tubing at (17, 19).
Replace Roller Operated Valve (Bowthruster).
c.
(1) Position roller operated valve (14) on mounting bracket and secure with
mounting hardware (16).
(2) Remove caps or plugs from tubing.
(3) Connect tubing at (13, 15).
Replace Roller Operated Valve (Fire Pump).
d.
(1) Position roller operated valve (10) on mounting bracket and secure with
mounting hardware (12).
(2) Remove caps or plugs from tubing.
2-499
|
|||||
|
|||||
