| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-18-1
Repeat procedures k. and 1. for remaining run indicators.
m.
Install indicator light (23) and incandescent lamp (22).
n.
Grasp light lens (stop) (21) between thumb and forefinger, insert in slot and
o.
squeeze gently until lens is seated.
Repeat procedure o. for light lenses (start) (20) and remaining light lenses
(stop).
Install push switch (19) and incandescent lamp (18).
q.
r.
Grasp light lens (deadman alarm) (17) between thumb and forefinger, insert a
slot and squeeze gently until lens is seated.
Install push switch (16) and incandescent lamp (15).
s.
Grasp light lens (engineer assist) (14) between thumb and forefinger, insert
t.
in slot and squeeze gently until lens is seated.
u.
Install push switch (13) and incandescent lamp (12).
Grasp light lens (stop) (11) between thumb and forefinger, insert in slot and
v.
squeeze gently until lens is seated.
Repeat procedure v. for light lens (start/run) (10) and remaining light
w.
lenses (stop).
x.
Install push switch (9) and incandescent lamp (8).
Grasp light lens (power on lamp test) (7) between thumb and forefinger,
y.
insert in slot and squeeze gently until lens is seated.
Install push switch (6) and incandescent lamp (5).
z.
aa.
Grasp light lens (scan) (4) between thumb and forefinger, insert in slot and
squeeze gently until lens is seated.
ab.
Contact direct support maintenance to install panel assembly.
2-506
|
||
|
||
