| Tweet |
Custom Search
|
|
|
|||||
|
|||||
 TM 55-1905-223-24-18-2
(2) Position terminal board ends (13) on panel.
(3) Install two machine screws (14) and secure each of three terminal board ends to panel.
(4) Solder electrical wires to each terminal board (15) on rear of terminal board ends (13).
(5) Remove tags.
b. Contactor.
(1) Position contactor (11) on panel (4).
(2) Install four machine screws (12) and secure contactor to panel.
(3) Solder electrical wires to contactor.
(4) Remove tags.
c. Fuseholder block.
(1) Position fuseholder block (9) on panel.
(2) Install two machine screws and secure fuseholder block to panel.
(3) Solder electrical wires to rear of fuseholder block.
(4) Remove tags.
d. Electromagnetic relay (240 Vdc) R1.
Install relay (7) by inserting relay into socket (8) as noted during disassembly.
e. Relay OR1, OR2 (1.6 - 2.5 AMP)
Install relays (6) by inserting each relay into its mounting pad (5) of OR1 and OR2 as noted during
disassembly.
f. Solid state relay SR1 through SR4.
(1) Position relay (3) on panel as noted during disassembly.
(2) Install two machine screws (2) and secure relay to panel.
(3) Loosen four terminal screws (1) on relay.
(4) Connect electrical leads.
(5) Secure leads on relay with terminal screws.
(6) Remove tags.
(7) Repeat steps (1) through (6) for remaining three relays, SR2, SR3 and SR4.
3-98
|
|||||
|
|||||
