REPAIR - TM-55-1905-223-24-18-20303

Custom Search

FIGURE 3-67. Repair Sun Shaft Group

TM-55-1905-223-24-18-2 Landing Craft Utility (LCU) NSN 1905-01-154-1191 Basic Craft Part II Manual

Repair Shifter Yoke Assembly

TM 55-1905-223-24-18-2

REPAIR

Repair at this level of maintenance is by replacement of clutch (22), spur gear (21), encased plain

bearing (8), gear and clutch (13), and shouldered shaft (14).

ASSEMBLY

a. Install gear and clutch (13), spacer and bushing (12) needle bearing (11), needle thrust bearing (10),

and thrust bearing races (9) on shouldered shaft (14).

b. Install retaining ring (5).

c. Install spacer (7) and encased plain seal (8).

d. Using an arbor press, press bearing (6) on shaft.

NOTE

When installing clutch (22) into spur gear (21), arrow on clutch

must be visible.

e. Install clutch (15), thrust bearing (16), gear and clutch (17), and needle bearing (18) on shaft.

f. Using an arbor press, press bevel gear (19) on shaft.

g. Install bushing (20).

h. Using an arbor press, press bearing (2) and clutch (22) into spur gear (21).

i. Install clutch, bearing, and spur gear on shaft.

j. Install spacer (1).

k. Replace mechanical transmission internal components. Refer to paragraph 2-58 .

3-281