Repair Column and Base Assembly.

Custom Search

FIGURE 3-69. Repair Pinion Shaft Group

TM-55-1905-223-24-18-2 Landing Craft Utility (LCU) NSN 1905-01-154-1191 Basic Craft Part II Manual

FIGURE 3-70. Repair Column and Base Assembly

TM 55-1905-223-24-18-2

3-68. Repair Column and Base Assembly. (Figure 3-70)

This task covers:

a. Disassembly

b. Repair

c. Assembly

INITIAL SETUP:

Tools

Equipment Condition

Tool kit, general mechanic's,

Motor and transmission removed,

para. 2-57 .

Column and base assembly removed,

Materials/Parts

para. 2-59 .

Manual lever P/N M1-1344

DISASSEMBLY

a. Remove cotter pin (2) and two flat washers (7) from drag link (8) on electric food mixing machine

column (5).

b. Remove drag link from manual lever (3).

c. Loosen set screws on crank stop (1), manual level (3), and collar (4).

d. Remove bowl lift lever (6), crank stop, manual lever, and collar.

REPAIR

Repair at this level of maintenance is by replacement of manual lever (3).

ASSEMBLY

a. Install bowl lift lever (6), collar (4), manual lever (3), and crank stop (1) on electric food mixing

machine column (5).

b. Tighten set screws on crank stop (1), manual lever (3), and collar (4).

c. Install drag link (8) in manual lever (3).

d. Install two flat washers (7) and cotter pin (2).

e. Refer to paragraph 2-59 to replace column (5) and base assembly.

3-286