ASSEMBLY - TM-55-1905-223-24-20037

Custom Search

Repair Nonmetallic Hose Assembly. (FIGURE 2-2)

TM-55-1905-223-24-2 Main Reduction Gear for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

Repair/Replace Fluid Transmission Cooler. (FIGURE 2-3)

TM 55-1905-223-24-2

b. Inspect the nonmetallic hose assembly (7) for kinks, bends, leaks, or other evidence of physical damage. Replace

as required.

Inspect all other parts for clear passages for fluid flow. Clean as required, using solvent, Item 4, Appendix C.

ASSEMBLY

CAUTION

During disassembly and assembly, use two wrenches on all fittings, nuts, and other

components used to couple tubes and hoses. Tubes and hoses may bend and kink

unless a counter-torque is applied.

a. Assembly of the nonmetallic hose assembly consists of replacement of the components to the gearbox.

b. Refer to paragraph 2-15 for replacement procedures.

2-23