| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-2
b. External intermediate shaft:
(1) Remove and cap all oil lines connected to the external intermediate shaft. Tag for identification.
(2) Remove capscrews (9) securing access cover (1) to bearing casing (4). Remove the access cover.
CAUTION
When removing access cover; ensure internal parts do
not drop out.
(3) Remove straight threaded pin (2).
(4) Remove shaft nut (8).
(5) Remove six capscrews (5) securing external intermediate shaft to the casing.
(6) Remove bearing casing (4).
REPLACEMENT
a. External input shaft:
(1)
Install external input shaft to casing and secure with capscrews (5).
(2)
Install locking plate (19) and shaft nut (20).
(3)
Fit pump drive housing (16) together and secure with cylindrical screws (22).
(4)
Install tapered pin/nut assemblies (21) and cylindrical screws (15).
(5)
Connect all oil lines going to the external input shaft. Use tags as a guide for connections.
b. External intermediate shaft:
(1)
Install external intermediate shaft to casing and secure with capscrews (5).
(2)
Install shaft nut (8).
(3)
Install straight threaded pin and washer (2).
(4)
Install access cover (1) onto bearing casing (4) and secure with capscrews (9).
(5)
Connect all oil lines to the external intermediate shaft. Use tags as a guide to connections.
3-16
|
||
|
||
