REPLACEMENT - TM-55-1905-223-24-20092

Custom Search

Replace Intermediate Shaft. (FIGURE 4-4)

TM-55-1905-223-24-2 Main Reduction Gear for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

Repair Intermediate Shaft. (FIGURE 4-5)

TM 55-1905-223-24-2

REPLACEMENT

WARNING

The intermediate shaft is heavy. Use a lifting sling

and hoisting device to remove and replace the

shaft. Be sure the lifting sling is properly attached

to keep the shaft balanced, and to keep the sling

from slipping off the ends.

a. Attach a lifting sling and hoisting device to intermediate shaft (1) and position it in the middle casing (2).

b. Install input shaft, paragraph 4-8.

Replace the upper casing, paragraph 4-8.

d. Install external input/intermediate shafts, paragraph 3-11.

e. Install control valve, paragraph 2-20.

Install double changeover filter, paragraph 2-18.

g. Install fluid transmission cooler, paragraph 2-17.

h. Attach external hardware, paragraph 2-14.

Install torsional coupling, paragraph 2-21.

Fill with oil, paragraph 2-5.

Start engine, referring to TM 55-1905-223-10. Check gearbox for leaks. Correct any troubles.

FIGURE 4-4. Intermediate Shaft.

417