| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
FIGURE 2-5. Electric Starting Motor/Magnetic Switch.
REPLACEMENT
CAUTION
Use the original spacers (or shims) removed with the starter if they were not damaged.
If new spacers (or shims) are used, ensure they are of the same thickness as the
originals.
a.
Install the starter (1) and bracket (8) with the capscrews (9).
b.
Tighten the capscrews to 130 ft-lb torque.
c.
Connect, and secure the electrical connections to the starter assembly (1). Remove tags.
d.
Install the magnetic switch with isolators (7), flat washers (6, 4), lockwashers (3) and nuts (2). Connect the
electrical leads to the magnetic switch (5). Remove tags.
e.
Reconnect batteries and start engine. TM 55-1905-223-10.
2-58
|
||
|
||
