| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
REPAIR
Repair of the fuel filter group is by replacement of parts. Refer to Removal and Replacement ste s of this
p
procedure.
REPLACEMENT
a. Mount the fluid filter head (3) to the bracket with assembled washer screws (1). Tighten screws to 30 to
35 ft-lb (40.6 to 47.4 N ) torque.
m
b. Apply teflon pipe thread lubricant to threads exposed on elbows (6 and 9). Connect nonmetallic hose
assemblies (8 and 5) to elbows (6 and 9).
c.
Connect nonmetallic hose assembly (8) to fuel supply (4).
d. Connect nonmetallic hose assembly (5) to outlet fitting (4) on fuel pump.
e. Install two new fuel cartridges (7) to the head (3) as follows:
(1) Apply a light coat of lubricating oil to the gaskets on the cartridges (7).
NOTE
Do not use a strap wrench to install filter cartridge.
(2) Install the cartridge (7) by hand, turning clockwise, until the gasket on the cartridge (7) contacts the
gasket surface on the head (3). Then tighten another 1/2 to 3/4 turn. Repeat sequence for other
cartridge.
f.
Open the fuel supply valve (TM 55-1905-223-10), remove tags, and run engine to check for leaks.
Correct as required.
2-81
|
||
|
||
