| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
REPAIR
Repair to the lube oil bypass filter group is by replacement of parts listed in Materials/Parts.
REPLACEMENT
a. Position fluid filter head (13) on the angle bracket (3 and install three hexagon capscrews (8), flat
)
washers (7), lockwashers (6), and plain hexagon nuts (5).
b. Apply a light coat of engine oil to the gasket surface of the filter (14) and install the new filter by turning
clockwise, by hand. Turn the filter (14) until the gasket surface on the filter (14) contacts the head (13)
surface. Tighten another 1/2 to 3/4 turn.
c.
Connect nonmetallic hose assemblies (11, 15) to inlet and outlet oil lines.
d. Install loop clamp (9) and secure with hexagon headcapscrew (10).
e. Install loop clamp (19) and secure with hexagon head capscrew (16), lockwasher (17), and flat washer
(18).
f.
Return generator to service. TM 55-1905-223-10.
g. Check for leaks.
2-96
|
||
|
||
