| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
WARNING
Ensure the engine is properly attached to, and supported by, the
lifting fixture before removing engine mounting capscrews.
h. Attach the lifting fixture to the two lifting brackets on top of the engine (paragraph 2-45).
i.
Remove the capscrews holding the front and rear engine mounts to the frame support (subbase).
WARNING
Soldiers stand clear during hoisting operation.
j.
Lift the engine slowly, ensuring th t the lifting device is holding properly.
a
k.
Remove the engine assembly.
NOTE
It may be necessary to move, or remove, other external
components or fixtures to provide necessary clearance for
removing the engine.
REPAIR
Repair of the diesel engine is accomplished through maintenance procedures in paragraph 3-15
through 3-48.
REPLACEMENT
a. Use the lifting fixture and sling to hoist replacement engine into place on the frame support and install
the mounting capscrews.
b. Torque capscrews to 135 ft-lb (190 N ).
m
c.
Remove the lifting fixture.
d. Connect the following lines to the engine:
(1) Coolant supply, drain, and remote expansion tank vent lines.
(2) Dirty oil drain line at sump pump.
(3) Oil supply line.
(4) Fuel supply and tank return.
3-32
|
||
|
||
