REPLACE/REPAIR OIL PAN GROUP.

Custom Search

FIGURE 3-43. Oil Pan Torque Sequence.

TM-55-1905-223-24-3 Ship s Service Generator for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

FIGURE 3-44. Oil Pan Group.

TM 55-1905-223-24-3

3-21. REPLACE/REPAIR OIL PAN GROUP.

This task covers:

a. Removal

Repair

Replacement

INITIAL SETUP:

Tools

Equipment Condition

Tool kit, general mechanic's

Engine cooled below 120 (50 ).

rail and marine diesel engines,

Air supply secured (port).

Battery banks disconnected (starboard).

Torque wrench kit P/N 3377216

TM 55-1905-223-10.

Lubricating oil drained (PMCS Table

Materials/Parts

2-1, Item 15).

Gasket P/N 57551

Nonmetallic hose assembly P/N 3017963

Sediment strainer element P/N 20622

Oil pan P/N 193631

Metal cleaning solvent, Item 6,

Hand hole gasket P/N 65274

Lube oil pump gasket P/N 157551

Gasket P/N 3032861

Shutoff valve P/N 3023067

Lubricating oil, Item 2, Appendix C

Contact adhesive

REMOVAL

a. Remove the liquid level gauge rod-cap (18, Figure 3-44) from the dipstick tube (17). Remove the filler

opening cap (16).

b. Remove the loop clamp (9) from the nonmetallic hose assembly (8).

Remove the four machine screws and flat washers (13) from the access cover (14) and remove the

tube (17), access cover (14), and handhold gasket (15) from the cylinder block. Discard gasket.

d. Disconnect the nonmetallic hose assembly (8) from the oil pan (4) connection and lubrication pump

connection. Remove the nonmetallic hose assembly (8).

e. Remove the two assembled washer screws (7) from the flange-to-tube elbow (6) and remove the elbow

(6) and the gasket (5) from the oil pan (4). Discard the gasket.

3-85