| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
c.
Rod bearings.
(1)
Install the upper and lower bearings in the connecting rod (1, Figure 4-28).
(2)
If used bearings are to be installed, each bearing must be installed in its original location.
NOTE
The tang of the bearing must be in the slot of the rod.
(3)
Use clean Lubriplate 105 or equivalent to lubricate the bearings.
(4)
Apply a heavy film of clean engine oil to the liner.
(5)
Install the (dowel) pins (12) in the connecting rod (1).
(6)
Join the connecting rod halves (1).
(7)
Install machine bolts (10).
d.
Install piston assembly and connecting rods (para. 3-23).
4-85
|
||
|
||
