Tweet |
Custom Search
|
|
|
||
TM 55-1905-223-24-5
Table 2-2. Troubleshooting-CONT
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
STEP 2. Check cylinder head gasket for leaks.
Replace head gasket (para. 2-41).
STEP 3. Check for cracked or porous cylinder head.
Pressure test the cylinder head (para. 4-12).
Replace the cylinder head (para. 2-41).
10. Excessive lubricating oil loss.
STEP 1. Check for external oil leaks.
Tighten capecrews, pipe plugs and fittings.
STEP 2. Incorrect dipstick calibration.
Check dipstick calibration and guide tube (para. 2-6b).
STEP 3. Check for incorrect oil
Change oil (LO 55-1905-223-12).
STEP 4. Check for fuel contaminated oil.
Refer to Malfunction 13.
STEP 5. Check for incorrect (extended) oil change internals.
Refer to LO 55-1905-223-12.
STEP 6. Check for high oil temperature above 205 (96 ).
F
C
Check engine oil and coolant levels.
STEP 7. Check for malfunctioning turbocharger seat
a. Add one unit of fluorescent tracer to each 10 gallons of engine lubricating oil.
b. Operate the engine at low idle for 10 minutes.
c. Shut off the engine.
d. Allow the Charger to cool and remove the exhaust pipe from the turbine housing (para. 2-26).
e. Use a high intensity black light to inspect the turbine outlet for oil.
NOTE
A dark blue glow indicates fuel and yellow glow indicates oil.
f. Replace turbocharger (para. 2-26).
Change 2
2-34
|
||