TM 55-1905-223-24-5
(5)
Open the water inlet and outlet valves (10).
(6)
If leakage is still present, install a new filter element (13) and recheck.
(7)
If the new filter (13) element still leaks, replace the head (12) assembly. Refer to
removal and replacement steps of this procedure.
c.
Check connection fittings (3, 4, 1) for signs of leaks and corrosion.
(1)
Tighten fittings (3, 4, 1) and hose clamps (9).
(2)
If fittings are corroded.
(a) Close inlet and outlet valves (10).
(b) Remove fittings and clean and inspect. Replace the fittings as necessary.
(c) Install the fittings and re-check.
NOTE
For coolant inspection and test procedures, refer to TB 55-1900-207-24.
FIGURE 2-13. Water Filter Group.
2-62