| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-5
FIGURE 4-27. Removing Camshaft Gear.
CAUTION
Do not use a heating torch to remove the gear. If you use a
heating torch, a new gear must be installed.
(2)
Push the shaft from the gear.
NOTE
If the camshaft key is marked with an arrow, record the direction
in which it is pointed.
(3)
Use a flat chisel and hammer to remove the camshaft key.
INSPECTION
CAUTION
If the inside diameter of the gear is damaged in excess of a
0.125 inch (3.175 mm) wide band, do not use the gear. This
damage can result in gear movement on the camshaft nose
which can cause camshaft nose failure.
a. Inspect the gear, as follows:
(1)
Inspect the gear for cracks, chipped or broken teeth.
4-60
|
||
|
||
