| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-5
FIGURE 4-62.
Checking Liner Bore.
(m) Inspect the cylinder block liner counterbore for burs.
(n) Remove the burrs, or replace the damaged parts.
(o) Repeat steps (a) through (h).
c. Remove and inspect the piston cooling nozzles (15, FIGURE 4-55) .
(1) Remove the six self-locking screws (16, FIGURE 4-55) and pull the nozzles (17) from the cylinder
block as illustrated in FIGURE 4-63 .
(2) Remove and discard the preformed packing (18, FIGURE 4-55) .
(3) Clean the piston cooling nozzles with an approved solvent.
(4) Blow out the oil passages with compressed air.
(5) Visually inspect the cooling nozzles for cracks or damage.
(6) Visually inspect the screws for damaged threads.
(7) Replace any damaged parts.
Change 2
4-107
|
||
|
||
