| Tweet |
Custom Search
|
|
|
||
 TABLE 2-1. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
D - DAILY
M - MONTHLY
Q - QUARTERLY
A - ANNUALLY
AR - AS REQUIRED
INTERVAL
ITEM
ITEM TO BE
PROCEDURE
NO.
INSPECTED/SERVICED
D
M
Q
A
AR
8
Electric Pump Motor
Lubricate.
a. Wipe grease fitting.
b. While motor is stationary
inject 2 or 3 strokes of
lithium base bearing grease.
c. Repeat for grease fitting at
opposite end of shaft.
d. Wipe off excess.
9
Drive Shaft
Check that the flanges
(both ends) are connected
securely to the engine and
waterjet.
Check for excess dirt
around U-joints.
Service.
a. Locate the grease fitting
on the spline.
b. Wipe old grease and dirt from
fitting with a rag.
c. Using a grease gun, apply alithium base
bearing grease to the fitting until it
will take no more or until grease seeps
out.
|
||
|
||
