ASSEMBLY - TM-55-1905-223-24-60065

Custom Search

Repair Feedback Unit

TM-55-1905-223-24-6 Bowthruster Water Jet for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

Figure 2-3. Feedback Unit

TM 55-1905-223-24-6

REPAIR

Repair at this level is limited to replacement of rudder angle transmitter (9).

ASSEMBLY

a. Guide the drive coupling (8) into the console (4) until the mounting holes on the console (4) align

with the mounting holes on the rudder angle transmitter (9).

b. Install the hexagon head cap screws (5), spring washers (6), and plain hexagon nuts (7). Torque to 15 ft-

lbs.

Insert the electrical wires through the cable clamp (3) and into the terminal block inside the rudder

angle transmitter (9). Tighten the screws on the cable clamp (3).

d. Tighten the screws on the terminal block using a jewelers screwdriver and remove the tags from the

electrical wires.

e. Install the top cover (2) and secure with screws and washers (1).

Restore bowthruster waterjet to operation and remove warning tag.

g. Check the transmitter alignment. Refer to Troubleshooting, Table 2-2, Item 2, Step 4.

2-25