| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-9
2-22. Replace/Repair Header Tank (FIGURE 2-13)
This task covers:
a. Removal,
b. Repair,
c. Replacement
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanics'
Equipment shutdown and tagged
"Out of Service - Do not
Operate."
See TM 55-1905-223-10
Materials/Parts
Utility pail, item 28, Appendix C
Header tank, P/N 1200-40770
Filler/breather cap, P/N ABS10
Level sight glass, P/N LG-5
REMOVAL
a. Position utility pail under header tank.
b. Remove filler/breather cap (2).
c. Disconnect hydraulic line (5) at header tank (1) and drain fluid into utility pail.
d. Remove the four nuts, bolts and washers (3).
e. Remove tank (1).
f. Remove level sight glass (4).
REPAIR
Repair consists of replacing sight glass (4) and filler/breather cap (2).
REPLACEMENT
a. Install level sight glass (4).
b. Install tank (1) with four bolts, washers and nuts (3).
c. Connect hydraulic line (5) to header tank.
d. Fill header tank with clean filtered hydraulic fluid.
e. Install filler/breather cap (2).
f. Check for leaks.
g. Properly dispose of used hydraulic fluid.
h. Clean and store utility pail.
Hulls 2008 and subsequent
Change 1 2-42
|
||
|
||
