Custom Search
TM 55-1905-223-24-9
2-25. Replace Feedback Unit #2 (FIGURE 2-16)
This task covers:
a. Removal,
b. Replacement
Equipment Condition
Tool kit, general mechanics'
Equipment shutdown and tagged
"Out of Service - Do not
Feedback linkage removed.
Feedback unit, P/N 9999-10100
a. Remove fourteen screws (3) and washers (4) from the cover (2).
b. Remove the cover (2).
c. Remove and tag wires from terminal boards (1).
d. Pull the cable from the case.
e. Remove four mounting bolts (7), nuts (5) and washers (6).
f. Remove the feedback unit.
a. Set the feedback unit in place and align the mounting holes.
b. Install the four mounting bolts (7), nuts (5) and washers (6).
c. Feed the cable into the case.
d. Connect the wires to the terminal boards (1) and remove tags.
e. Place the cover (2) on the unit and secure with fourteen screws (3) and washers (4).
f. Restore equipment to normal operation (TM 55-1905-223-10).
Hulls 2008 and subsequent
Change 1 2-49


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business