| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0015 00
SEA 7001 MF/HF DSC WATCH RECEIVER
68.
2M/2187.5 kHz Annunciator Light
This is an annunciator light only. GMDSS regulations require full-time
scanning of 2187.5 kHz, therefore this channel may not be deselected from
scan.
69.
4M/4207.5 kHz Switch
Toggles scan status of 4207.5 kHz. When annunciator is lighted, the
channel is currently in the scan list.
70.
6M/6312 kHz Switch
Toggles scan status of 6312 kHz. When annunciator is lighted, the chan-
nel is currently in the scan list.
71.
8M/8414.5 kHz Switch
This is an annunciator light only. GMDSS regulations require full-time
scanning of 8414.5 kHz, therefore this channel may not be deselected from
scan.
72.
12M/12577 kHz Switch
Toggles scan status of 12577 kHz. When annunciator is lighted, the chan-
nel is currently in the scan list.
73.
16M/16804.5 kHz Switch
Toggles scan status of 16804.5 kHz. When annunciator is lighted, the
channel is currently in the scan list.
74.
TST Switch
Initiates TEST mode.
75.
SCN Switch
Toggles SCAN status. If receiver is scanning, pressing SCN will cause the
receiver to exit the scan mode. A second press will re-initiate the scan.
76.
VOL Switch
Controls the volume level of the internal speaker. Four pre-set levels are
provided: OFF, LOW, MEDIUM, and HIGH.
77.
DIM Switch
Controls illumination level for backlit keys and annunciators. Four pre-set
levels are provided: OFF, LOW, MEDIUM, and HIGH.
78.
PWR Switch
Toggles power ON and OFF.
70
72
69
68
71
73
SEAWATCH
TM
M F / H F D S C WAT C H R E C I E V E R
2M
4M
6M
8M
12M
16M
2187.5
4207.5
6312
8414.5
12577
16804.5
PWR
DIM
VOL
SCN
TST
78
77
76
75
74
0015 00-9
|
||
|
||
