| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0026 00
ENGINE ALARMS
1.
To activate the engine alarms, set to ON the ENGINE ALARM PANEL circuit breaker (27), located in the control and
distribution panel.
2.
When low oil pressure or high coolant temperature is detected in the main propulsion engines, lights on the pilothouse
console indicate which engine (port (28) or starboard (29)) is exhibiting which condition (low oil pressure (30) or high
coolant temperature (31)).
3.
To shut down the engine alarms, set to OFF the ENGINE ALARM PANEL circuit breaker (27).
30
32
084 20AF
065 20AF
093
20A
087
20A
064 20AF
070
20A
OILY WTR
SEARCH
BLK WTR
ENG RM
ENG RM
WIPERS
BILGE
LT
DISC
VENT FAN
VENT FAN
PORT &
PUMP
PUMP
NO. 2
NO. 1
CENTER
076
15A
071
15A
092
15A
086
15A
077
15A
083 10AF
ENG RM
WIPERS
24 VDC
NAV LTS
ENG RM
W/C
LTS PORT
STBD &
RCPTS
PANEL
LTS
PUMP
& LAZ
WASH
STBD
PUMP
LOW OIL PRESSURE
5A
074
10A
073
075
10A
088
10A
082
10N
5A
072
WHITE LTS
WHITE
RED LTS
RED LTS
FRESH
27
PILOT
LTS
ACCOM
HORN
WTR TANK
PILOT
HOUSE
ACCOM
PRESS
CHART &
HOUSE
CHART &
SET
& W/C
COMPASS
COMPASS
28
29
PORT
STBD
080
5A
066
5A
090
5A
069
2.5A
081
5A
078
5A
HYD
FIRE
VENT FAN
ENGINE
VENT
WEATHER
HIGH WATER TEMP
CRANE
PUMP
BATTERY
ALARM
FAN
DECK
DIVERT
CLUTCH
COMP
PANEL
W/C
LIGHTS
VALVE
067 2.5A
068 2.5A
079
5A
085 2.5A
089 2.5A
103
15A
VENT FAN
VENT FAN
GEN
FIRE
RUDDER
RED
NO. 1
NO. 2
ALARM
DETECT
ANGLE
CARGO
ACCOM
ACCOM
SYSTEM
& TANK
LIGHTS
GAUGES
FUSES LOCATED
054 2.5A
055 2.5A
053
5A
BEHIND COVER
SPARE
SPARE
SPARE
31
OILY WATER COLLECTION SYSTEM
The oily water collection system can be used to pump oily water from the bilges, to drain lube oil from the engines and marine
transmissions, and to pump oily water or oil from buckets. The oil is stored in a dedicated oily water collection tank in the
engine room. The system can also pump the oily water discharge tank contents to an approved shore station.
Pump Oily Water from Bilges
1.
Set to ON the OILY WTR BILGE PUMP circuit breaker (32), located in the control and distribution panel.
2.
OPEN the oily water collection pump suction valve (33) at the bilge manifold.
3.
OPEN the compartment suction valves (34) for the compartment to be drained.
4.
Ensure that the bilge pump suction valves (35) are CLOSED.
5.
OPEN the oily water pump to tank valve (36).
6.
Ensure that valves 37, 38, 39, 40, and 41 are CLOSED.
0026 00-8
|
||
|
||
