| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0053 00
ITEM
INTERVAL
MAN-
ITEM TO BE
PROCEDURE
EQUIPMENT
NO.
HOUR
CHECKED OR
NOT READY/
SERVICED
AVAILABLE IF:
75
Ramp Winch
Weekly
2.0
Hydraulic
Inspect hydraulic motor for leaks and
Class III leakage is
Motor
tighten connections as necessary.
noted.
Check mounting bolts for security and
tighten as necessary.
AFT DECK
76
Navigation Lights
Weekly
0.5
Fixtures and
Check fixtures for secure mounting to
Fixtures not securely
Switches
mast and pilothouse. Check switches
mounted.
for looseness and malfunction.
Switches malfunction.
LAZARETTE
77
Weekly
0.2
Steering
Grease steering tie bar pins and steering
Cylinders
cylinder pins. See table 1.
78
Rudder
Weekly
0.2
a. Rudder Posts
Apply three shots of grease to each of
the 3 fittings on each rudder post. See
table 3.
1.0
b. Rudder and
Ensure that tiller is stowed properly.
Class III leakage noted.
Tiller
Check tiller sockets for accumulation of
foreign matter. Remove foreign matter
from tiller sockets. Check rudder shaft
packing for leakage.
79
Weekly
0.3
Fuel Tanks, Piping, Inspect tanks, valves, piping joints, and Class III leakage noted.
Valves, Hoses, and hose assemblies for leaks or damage.
Fittings
Check fuel tank for water contamina-
Fuel tank contaminated
tion using water indicator paste.
with water.
Ensure that filler cap, sounding tube
cap, and vent cover are in place and
seal the fuel oil system.
ENGINE ROOM
80
Weekly
0.4
Throttle
Inspect linkage from control head to
Linkage is bent, kinked,
Linkage
governor for cable damage. Ensure that
severed, or loose,
linkage is free to move and is not bound
affecting throttle
at any point.
control.
81
Weekly
0.4
Clutch
Inspect linkage from control head to
Linkage is bent, kinked,
Linkage
transmission for cable damage. Ensure
severed, or loose,
that linkage is free to move and is not
affecting clutch control.
bound at any point.
82
Steering System
0053 00-14
|
||
|
||
