| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0089 00
INSTALLATION
! CAUTION
Do not force the starting motor into its opening in the flywheel housing. When properly
aligned, the hydraulic starting motor adapter will enter the flywheel housing easily. Do
not use force to align the starting motor. Failure to comply with this caution could result
in damage to the starting motor, the flywheel housing, or the flywheel.
1.
Insert the starting motor (2) into the flywheel housing opening. When properly aligned, the hydraulic starting motor
adapter will enter easily.
2.
Rotate the starting motor (2) so that the bolt holes are aligned with the tapped holes in the flywheel housing. Secure the
starting motor to the flywheel housing with the retaining bolts (3) and lockwashers (4).
3.
Connect the lines (1) to the starting motor (2) using the labels from step 4 of Removal as a guide.
4.
Check the hydraulic fluid level in the reservoir and replenish as necessary.
5.
Remove the lockouts and tagouts and check the operation of the system. Ensure that the starting motor engages the
flywheel, spins the engine, disengages from the flywheel, and does not leak.
6.
Dispose of used hydraulic fluid, cleaning solvent, and contaminated materials in accordance with local regulations.
END OF WORK PACKAGE
00890089 00-5
00-5/6 blank
|
||
|
||
