| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0091 00
INSTALLATION
1.
Procure a new pipe, hose, or fitting (3) as necessary.
2.
By hand, thread the stationary fitting (1) and the swivel fitting (2) together.
3.
Place one wrench on the stationary fitting (1) and one wrench on the swivel fitting (2). Turn the swivel fitting while
holding the stationary fitting to tighten the connection.
4.
Perform steps 2-3 on the other end of the new pipe, hose, or fitting (3).
5.
Remove the lockouts and tagouts and fill the fuel tank if necessary.
6.
Wipe the work area clean with wiping rags and check for leakage.
7.
Start the propulsion engines and check the work area for leakage.
8.
Dispose of used diesel fuel and contaminated materials in accordance with local regulations.
END OF WORK PACKAGE
0091 00-2
|
||
|
||
