| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0107 00
REPAIR (continued)
c.
Remove the bolts, nuts, and washers that connect the alarm panel to its mount.
d.
Label and disconnect the wiring (7) from the alarm panel.
e.
Procure a new alarm panel.
f.
Connect the wiring (7) to the alarm panel using the labels from step d as a guide.
g.
Position the alarm panel on its mount and secure it with its nuts, bolts, and washers.
h.
Position the alarm panel cover (6) on the alarm panel and secure it with the four screws (5).
2.
To replace the flame detector:
a.
Disconnect the flame detector wiring (8) from the junction box (9).
NOTE
Cotter pins, lockwashers, locking nuts, and similar locking devices shall be discarded after removal and replaced with
new cotter pins, lockwashers, locking nuts and similar locking devices.
b.
Remove the bolts (10), nuts (11), and lockwashers (12) that secure the flame detector (13) to its mount.
c.
Procure a new flame detector (13).
d.
Position the flame detector (13) on its mount and secure it with bolts (10), nuts (11), and lockwashers (12).
e.
Connect the flame detector wiring (8) to the junction box (9).
9
0107 00-3
|
||
|
||
