| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0118 00
REMOVAL (continued)
2.
Remove the loudhailer (2) from its mount (3). Set the multimeter to the Vdc (Volts direct current) setting and check for
voltage at the 13.6V + and - terminals. If no voltage is noted, proceed to the next step. If voltage is noted, ensure that
the circuit breaker is properly secured.
3.
Label and disconnect the wiring from the back of the loudhailer (2).
INSTALLATION
1.
Connect the wiring to the back of the loudhailer (2) using the labels from step 3 of Removal as a guide.
2.
Position the loudhailer (2) in its mount (3) and secure it with the two knobs (1).
3.
Remove the lockouts and tagouts and check the operation of the system.
END OF WORK PACKAGE
0118 00-2
|
||
|
||
