| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0177 00
INSTALLATION
1.
Align the pump drive and position the pump (4) and a new gasket (5) on the engine. Secure the pump with the mounting
bolts (3).
2.
Wrap the male threads of the suction (6) and discharge (7) fittings with antiseizing sealant tape and install the fittings
into the pump (4).
3.
Remove the caps from the suction (1) and discharge (2) lines and connect the lines to the suction (6) and discharge (7)
fittings.
4.
Remove the lockouts and tagouts and check the operation of the system, ensuring that the helm operates normally and
that no leakage is present.
5.
Check the hydraulic fluid level in the reservoir and replenish it as required.
6.
Dispose of used hydraulic fluid and contaminated materials in accordance with local regulations.
END OF WORK PACKAGE
0177 00-2
|
||
|
||
