| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0178 00
REMOVAL (continued)
6.
Have one crewmember support the cylinder (5) while the other removes the clevis pin (8) and spacer (9).
7.
Remove the cylinder (5) from the support plate (10) and tiller mount (11).
4
13
7
10
12
8
3
6
11
9
2
5
1
INSTALLATION
1.
Have one crewmember position the cylinder (5) on the support plate (10) while the other installs the clevis pin (8) and
spacer (9).
2.
Install the circlip (7) on the clevis pin (8).
3.
Extend or retract the cylinder rod (12) as required to align the clevis (13) with the tiller mount (11).
4.
Install the clevis pin (4) and spacer (6) through the clevis (13) and tiller mount (11). Secure the clevis pin with the circlip
(3).
5.
Uncap the hydraulic hoses (1 and 2) and install them on their respective fittings using the labels from step 3 Removal as
a guide.
6.
OPEN the steering isolation valves and CLOSE the steering bypass valves (WP 0020 00).
7.
Remove the lockouts and tagouts, and bleed the air from the system by using the helm to swing the rudders from full port
to full starboard eight to ten times. Also check for any sign of leakage.
8.
Check the hydraulic fluid level in the reservoir and replenish it as necessary.
9.
Dispose of used hydraulic fluid and contaminated materials in accordance with local regulations.
END OF WORK PACKAGE
0178 00-2
|
||
|
||
