| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0194 00
12
11
13
14
16
11 12
15
15
16
10
9
4
8
5
1
6
2
3
7
INSPECTION
1.
Inspect the manual extension section (3), the hydraulic extension section (4), and all hardware for wear, damage, or
deformity.
2.
If the bushings (15) are worn, remove them by removing their attaching screws (16).
3.
Inspect the extension cylinder (14) for dents, scrapes, or corrosion of the rod section. Check the barrel for cracking or
damage. Check the entire cylinder for signs of leakage. Replace the cylinder if damage or leakage are found.
4.
Procure any parts necessary.
ASSEMBLY
1.
If the bushings (15) were removed, position them on the second boom section (10) and on the hydraulic extension
section (4) and secure them with their attaching screws (16).
2.
Apply a light coat of grease to the bushings (15).
3.
Position the extension cylinder (14) on the second boom section (10) and secure it with the pin (13), washers (12), and
screws (11).
4.
Using two crewmembers, slide the hydraulic extension section (4) into the second boom section (10).
0194 00-2
|
||
|
||
