| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0204 00
INSTALLATION (continued)
d.
Connect the raw water piping (35) to the top of the muffler (26).
2.
To install the exhaust expansion connector joint (31):
a.
Position the exhaust expansion connector joint (31) and new gaskets (19 and 34) between the exhaust outlet
elbow (13) and the hull (36).
b.
Secure the exhaust expansion connector joint (31) with the bolts (14 and 32), washers (15), lockwashers (16 and 33),
and nuts (17).
3.
To install the muffler inlet piping (20):
a.
Position the muffler inlet piping (20) and new gaskets (10 and 30) between the muffler (26) and the flexible
joint (4).
b.
Secure the muffler inlet piping (20) to the flexible joint (4) and muffler (26) with the bolts (5 and 21), washers (6 and
22), lockwashers (7 and 23), and nuts (8 and 24).
c.
Secure the muffler inlet piping (20) to the hangers with the the bolts (27), lockwashers (28), and nuts (29).
4.
To install the exhaust outlet elbow (13):
a.
Position the exhaust outlet elbow (13) and new gaskets (19) between the muffler (26) and the exhaust expansion
connector joint (31).
b.
Secure the exhaust outlet elbow (13) with the bolts (14), washers (15), lockwashers (16), and nuts (17).
5.
To install the flexible joint (4):
a.
Position the flexible joint (4) and new gaskets (10) between the muffler inlet piping (20) and exhaust elbow (11).
b.
Secure the flexible joint (4) to the muffler inlet piping (20) and exhaust elbow (11) with the bolts (5), washers (6),
lockwashers (7), and nuts (8).
6.
To install the exhaust elbow (11):
a.
Screw the pipe (12)/flange (9) assembly into the exhaust elbow (11) if they were removed during disassembly.
b.
Screw the exhaust elbow (11), pipe (12), and flange (9) as an assembly into the exhaust manifold.
c.
Install the flexible joint (4) as described in step 5 of Installation.
7.
Install the lagging (1) and secure it by crisscrossing wire (2) through the clips (3).
8.
Remove the lockouts and tagouts and check the operation of the system, ensuring that no exhaust or raw water leaks are
present.
END OF WORK PACKAGE
0204 00-4
|
||
|
||
