| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0215 00
INSPECTION
NOTE
Minor scoring may be removed from the piston, rod, and barrel by light stoning or
lapping. Replace all damaged or distorted parts.
1.
Inspect the barrel, rod, and piston for burrs and scores.
2.
Inspect all threaded parts for thread damage.
3.
Inspect the retainer plate, rod end head, and blind end cap for cracks or breaks.
4.
Replace all seals and packings.
ASSEMBLY
1.
Install the piston seals (15) on the piston (7).
2.
If the piston (7) was removed from the rod (8), join the piston and the rod and secure them with the nut (14).
3.
Install the barrel seal (13) in the blind end cap (6).
4.
Install the wiper (9), cap seal (10), rod seal (11), and barrel seal (12) in the rod end head (4).
5.
Lubricate the piston (7), piston seals (15), and the interior of the barrel (5) with clean hydraulic fluid and slide the piston
(7) and rod (8) assembly into the barrel.
6.
Install the blind end cap (6) on the barrel (5).
7.
Lubricate the wiper (9) and rod seal (11) with clean hydraulic fluid and install the rod end head (4) on the barrel (5).
8.
Install the retainer plate (3) and secure it with the retainer plate bolts (1) and nuts (2).
9.
Dispose of used hydraulic fluid, cleaning solvent, and contaminated materials in accordance with local regulations.
END OF WORK PACKAGE
02150215 00-3
00-3/4 blank
|
||
|
||
