| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0216 00
REPAIR (continued)
WARNING
Cleaning solvent is flammable and its vapor is potentially explosive. Do not use clean-
ing solvent in the vicinity of spark, open flame, or excessive heat. Do not use cleaning
solvent in unventilated spaces. Failure to comply can result in serious injury or death.
Do not allow hydraulic fluid or cleaning solvent to come in contact with unprotected
skin or eyes. Prolonged skin contact can cause illness or injury. Eye contact can cause
serious injury. Always wear chemical protective gloves and goggles when handling
used hydraulic fluid and cleaning solvent. Failure to comply can result in illness, seri-
ous injury, or death.
REMOVAL--FINAL DRIVE ASSEMBLY
1.
Don chemical protective gloves and goggles.
NOTE
Cotter pins, lockwashers, locking nuts, and similar locking devices shall be discarded after removal and replaced with
new cotter pins, lockwashers, locking nuts and similar locking devices.
2.
Remove the nuts (1) and lock washers (2) from the final drive housing (3).
3.
Support the final drive assembly with additional personnel or a suitable lifting device and use two heel bars to remove
the final drive housing (3) from the dowel bolts (4).
4
7
12
8
6
3
5
9
17
11
16
19
10
20
20
19
18
0216 00-2
|
||
|
||
