| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-242-14
0221 00
INSPECTION--RAMP SHEAVES
1.
Inspect the sheave, bushing halves, pins, and thrust washers for cracks, breaks, burrs, or wear. Remove burrs by
grinding smooth or by light stoning.
2.
Replace any defective parts.
1
2
4
3
4
2
ASSEMBLY--RAMP SHEAVES
1.
Press the bushing halves (4) into the sheave (3).
2.
Lubricate the flat thrust washers (2) and pin (1) with grease and install them in the sheave (3).
DISASSEMBLY--LATCH MECHANISM
1.
Remove the grease fitting (5) from the pin (6).
2.
Remove the circlips (7) that secure the pin (6) in the clevis (8).
3.
Remove the pin (6) from the clevis (8) and latch (9). Use an arbor press if necessary.
8
6
7
5
9
0221 00-2
|
||
|
||
