| Tweet |
Custom Search
|
|
|
||
 fresh water pump, and the engine lubrication oil pump,
(2) Pull handle of pump out as far as it will go, then
through a gear train.
push it all the way in, slowly, until increased resistance to
(1) Remove the crankcase inspection plates from both
movement indicates that the lines are full.
sides of the scavenging pump section (fig. 3-18).
f. Oil and Water Pump Drive. The oil and water pump
(2) Remove capscrews securing the handhole cover
drive is located in the engine base, at forward end, and is
(15, fig. 3-20) to the oil and water pump drive housing. Lift
driven by the crankshaft. It operates the raw water pump,
off handhole cover and gasket (16).
3-51
|
||
|
||
