| Tweet |
Custom Search
|
|
|
||
 Figure 5-64. Brush holder alignment.
(9) Install brushes and connect wiring to brush rigging.
in action. Hub of clutch sets on the generator shaft, with yoke
(10) Adjust brush tension (b. above).
and shifter collar on pump shaft.
(11) Lubricate in accordance with lubrication order. g.
b. Removal.
Installation. Reverse order of removal, making sure bed
(1) Remove capscrew from clutch lever (fig. 5-65),
shims are in same location from which removed.
remove capscrews from yoke, then withdraw the clutch
operating rod.
5-30. Clutch (Model CL208)
a General
A friction type clutch, with yoke h holder
alignment. and shifter collar, places the fire and salvage pump
5-85
|
||
|
||
