| Tweet |
Custom Search
|
|
|
||
 c. Replacement of Primary Reflector.
5-104. Searchlight
(1) Open door (8, fig. 5-132) and remove lamp
a. Removal.
(4) from its base.
(1) Remove nut at end of control rod (fig. 5-131).
(2) Withdraw control rod by pulling it down into
KEY to fig. 5-132:
the pilothouse. Lay aside carefully, pending installation.
1. Clamp, reflector
14.
Locknut, knurled
(3) Tag and disconnect electrical leads from
2. Pin, hinge
15.
Knob, adjusting
control box, loosen locknut, then withdraw electrical leads
3. Lens
16.
Base and yoke assembly
from pedestal (base).
4. Lamp
17.
Control lever assembly
(4) Remove capscrews and lockwashers securing
5. Reflector, secondary
18.
Handwheel clamp
pedestal to roof of pilothouse, then lift searchlight from the
6. Setscrew
19.
Oil fitting
pilothouse roof.
7. Setscrew (2)
20.
Cable
b. Installation.
Install by reversing the removal
8. Door
21.
Drum
procedure.
9. Clamp, lens
22.
Reflector, primary
10. Flange, lens seating
23.
Pad
11. Lockwasher
24.
Lockwasher
12. Screw
26.
Screw
13. Gasket
5-190
|
||
|
||
